8400 x 3000 cabin on a mobile home trailer:
- 8390×2.5 plus removable drawbar
- Mounting holes @ 400 centres are offset from centre on outside of Universal Beam rails, 1963 Ø mm separation
- Two unbraked and one braked axles aft of 60/40 weight distribution point
- ACEPNBT Straight Axle Non-Braked 1.75T HCH 50×5 Pregal 5×4.5 HF:2430 SC:1952 Cust: ECOCON (2 Sets)
- ACEPBT Straight Axle 10″ Elec 1.75T HCH 50×5 Pregal 5×4.5 HF:2430 SC:1952Cust: ECOCON (1 Set)
- S3216 Spring set 6L, 1500 kg / pr painted, complete (three axle)
- X3758 Rim/tyre assy 195/50 R13C 5 x 4 1/2″ 13 x 5.5″ galv rim (three axle)
- C2790 3500 kg electric coupling 50mm
- Double chains
- Six sets of axle hangers
- 50mm coupling (please confirm)
- Standard red oxide primer that requires a top coat
- Black paint top coat
- No guards or lights – Rob will provide loaner light kit and for three wheels to pass WOF
- WOF (reimburse Rob in cash). Customer supplies Rego Plate before WOF
Notes:
- We recommend 2.9 wide cabin frame to allow for cavity battens, cladding and joinery trim, to approx 3m width, allowing 50mm per side for fixtures. If fixtures are wider, reduce width
- We recommend the 150mm floor kit to provide rigidity when jacking up the cabin as an attached payload which is a legal Cat 1 oversize. If cabin is part of trailer and over 2.5m it is illegal on the road
- Loaner guards and loaner light kit
- You supply Rego
- Rob arranges WOF after you have delivered rego plate (necessary to be on trailer for WOF)
- Ready to tow away
- Return lights and guards within one week please
Click to Zoom
Not included
- B312610 Mechanical cable brake kit complete, 1 axle 10m
- BS35BTK Trailparts Breakaway kit, Test Box, 5 A/hr Batt, B/A switch