NOTE TO ROB: Wayne changed order to 6m length. Record updated 20 Sept 24

6000 x 3000 cabin on a mobile home trailer (actual trailer length is 10mm shorter):

• 5990×2.5 trailer plus removable drawbar
• Mounting holes @ 600 centres are offset from centre on outside of Universal Beam rails, 1963 Ø mm separation
• CHECK WITH STEEL FRAME DIRECT ON HOLES
• One unbraked and one braked axles
  • ACEPNBT Straight Axle Non-Braked 1.75T HCH 50×5 Pregal 5×4.5 HF:2430 SC:1952 Cust: ECOCON (2 Sets)
  • ACEPBT Straight Axle 10″ Elec 1.75T HCH 50×5 Pregal 5×4.5 HF:2430 SC:1952Cust: ECOCON (1 Set)
  • S3216 Spring set 6L, 1500 kg / pr painted, complete (three axle)
  • X3758 Rim/tyre assy 195/50 R13C 5 x 4 1/2″ 13 x 5.5″ galv rim (three axle)
  • C2790 3500 kg electric coupling 50mm
  • Double chains
• Four sets of axle hangers for two axles
• Braked axle mounted in front of centre line to stand on tyres without tipping if cabin is 50-50
• 1 7/8″ coupling
• No paint – bare steel requires immediate corrosion painting with proper prep BY CUSTOMER
• Customer buys guards and lights to pass WOF
• WOF (reimburse Rob $85 in cash). Customer supplies Rego Plate before WOF

Notes:

• We recommend 2.9 wide cabin frame to allow for cavity battens, cladding and joinery trim, to approx 3m width, allowing 50mm per side for fixtures. If fixtures are wider, reduce width
• We recommend the 150mm floor kit to provide rigidity when jacking up the cabin as an attached payload which is a legal Cat 1 oversize. If cabin is part of trailer and over 2.5m it is illegal on the road
• You supply Rego, mailed to Rosedale prior to WOF
• Rob arranges WOF after you have delivered rego plate (necessary to be on trailer for WOF)
• Ready to tow away

Click to Zoom